Ga k8ns ultra 939 updating bios

by  |  08-Apr-2019 17:56

Removing the heatsink under such conditions can cause the processor to be removed from the socket without moving the socket lever to the unlocked position and then damage the processor pins or socket contacts.** We recommend you to apply the thermal tape to provide better heat conduction between your CPU and heatsink.(The CPU cooling fan might stick to the CPU due to the hardening of the thermal paste.brands and names are the property of their respective owners.

Sometimes you may need to use the plastic springs to isolate the screw from the motherboard PCB surface, because the circuit wire may be near by the hole.

Be careful, don't let the screw contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise it may damage the board or cause board malfunctioning.(Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

Make sure your AGP card is locked by the small Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard,mouse, scanner, zip, speaker.. For more information please contact your OS or device(s) vendors.

LAN1 connector is fast Ethernet with 10/100/ 1000 Mbps speed.

The pin 1 location is designated on the processor by a copper triangle that matches up to a triangle on the socket as shown in Figure 2. When the processor is installed in the socket, apply thermal grease to the processor(as shown in Figure 3) prior to installing the heatsink.

Community Discussion